University of Khartoum

September 2011 Volume 57 Number 2

September 2011 Volume 57 Number 2

 

Recent Submissions

  • M.T., Zarmai,; A, Salihi, (Sudan Engineering Society., 2011-09)
    Inadequate and high energy cost are negatively affecting the textile industry. The identification and quantification of energy conservation potentials provides a basis for the development of an energy improvement programme ...
  • Elkhier Hussien Arfeen, Ibrahim; Jabar Kizar Alzubaid, Abdul Rasoul (Sudan Engineering Society., 2011-09)
    This paper aims to study field effect transistors as chemical sensor used for monitoring hydrogen ion concentration (H + ) measurement in chemical analysis and environment fields, to detect the pH of the subjected ...
  • Ali Hammad, Elbashir; Elnour Mohamed, Ahmed; Mohammed Ahmed, Osama (Sudan Engineering Society., 2011-09)
    Basic principles for bearing life calculation were briefly reviewed and applied to bearings in easily accessible pumping units in three sections for sugar process operations in Kenana Sugar Factory. Calculated lives were ...
  • Ali Elfaki, Elkhawad; Bilal, Abd Alfattah; Elnour Mohamed Mouzamel, Ahmed (Sudan Engineering Society., 2011-09)
    in the automobile differential gear drive which consists of two side gears and two pinion gears, the function of the differ ential pinions gears is to compensate the decrease in the speed of the output of one of the ...
  • Eltahir Elmarioud Ali, Salih; Hussein, Elamin (Sudan Engineering Society., 2011-09)
    Layout problems are found in several types of manufacturing systems. Typically, layout problems are related to the location of facilities (e.g ., machines, departments) in a plant. They are known to greatly impact the ...
  • Abdalla Elamin, Anwar; I. El-Niema, El-Niema (Sudan Eng. Society., 2011-09)
    The paper presents the results of an experimental work performed at the Khartoum University, Civil Engineering Department Structure lab. Six fixed supported slab specimens with varying parameters such as the reinforcement ...
  • Mohamed Elbasheer Ahmed, Adil; Ibrahim Shukri, Mohamed; Fathi Abd El-Wahed, Waiel (Sudan Eng. Society., 2011-09)
    In this study, a feature-based solid modeling of casting component features was developed. The feature-based model was built to extract and deliver geometrical and technological information of casting features. This ...